Primers & Undercoats
Home - Products - Marine Line - Yachting Line - Primers & Undercoats - SK1 Primer
SK1 Primer

SK1 Primer

pdf-icon
Code: 4P7219

Single-component primer based on special synthetic resins with fast drying time, containing anti-corrosive pigments. It is designed for direct application on various types of propellers made of both ferrous and non-ferrous materials, such as stainless steel, brass, aluminum, or light alloys. It forms a compact and elastic film. This primer is suitable for overcoating with both single- and two-component products, particularly with all CONTENDER antifouling paints for propellers, ensuring excellent adhesion to the substrate and easy application of subsequent coats. It is a highly versatile product, also suitable for use on various plastic materials such as fiberglass (GRP), or as a matte finish where high UV resistance is not required—for example: inside hulls, ribs, engine compartments—offering good resistance to oil and diesel

SURFACE PREPARATION AND APPLICATION CYCLE

Aluminum – Light Alloys – Steel – Brass. On a clean and dry surface, preferably roughened with coarse sandpaper (grit 80–100), where sandblasting or grinding is not possible. Dust off dry or degrease with Thinner 765 or Acetone. Apply one coat of MONOPRIMER and allow to dry for at least 2 hours. Recommended for application on propellers, to be completed with the application of 2 coats of CONTENDER ELIFAX antifouling paint.

Note: This product is also part of the Skipper’s Nautical Line. For more information on this range, please refer to the complete painting cycles for boats made of Wood, Steel, Aluminum, or Fiberglass, available upon request. www.aemmecolori.it

Paint Type One component
Binder type A Synthetic resin
Code & colour B Beige-Ivory
Specific gravity kg/lt (±0,05) 1,100
Viscosity Ford ø 8 at 20°C ±2 150-200 s
Shelf life +23°C (±2) 12 months in unopened cans
Application: Spray 30–40% Thinner 765
Brush-Roller 10–20% Thinner 765
Touch dry 30–60 min in air (20°C)
Recoat time 4–6 hours (20°C)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 30–40 microns per coat
Theoret. coverage m2/Lt 7–8 m²/Litre
SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.

NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.