Eco Satinato

Eco Satinato

pdf-icon

Code: 2CA000

Water-based acrylic enamel, fast drying, odourless and non-yellowing recommended for exterior satin finish. Being a water-based product (It does not contain solvent) it can also be used satisfactorily for interior, in place of conventional solvent based products thus avoiding the relevant smell problem. The particular resin used for the formulation of this product provides good adhesion and weather resistance.

SURFACE PREPARATION AND APPLICATION

Bare Steel
. If sandlasting is not possible, remove loose or powdery paint by scraper and rust by mechanical wirebrushing or abrasive sand disk. Dust off and clean the surface with a cloth soaked with Thinner. Once the surface preparation has been completed apply one coat of anticorrosive primer followed if necessary by a second one. Overcoat then with 2 coats of ECO SATINATO allowing the required waiting time between coats.

Painted Steel
. Remove any loose or powdery paint with a scraper, remove rust by wirebrushing or abrasive disk and sandpaper the surface with medium abrasive-paper (280-320). Dust off and clean the surface with a cloth soaked with thinner. Once the surface preparation has been completed apply one coat of anticorrosive primer followed if necessary by a second one. Overcoat then with 2 coats of ECO SATINATO allowing the required waiting time between coats.

Concrete/Plaster.
The substrate should be dry, clean and well seasoned. Apply one coat of ISOLFIX water-based sealer and let dry. Apply 2 coats of ECO SATINATO allowing the required waiting time between coats.

Wood. The substrate should be dry, clean and well seasoned. Apply one coat of water-based primer or as alternative one coat of ECO SATINATO largely diluted and let dry. Overcoat with 2 coats of ECO SATINATO allowing the required waiting time between coats.

Paint Type Water-based one-component paint
Binder type A Acrylic
Specific gravity kg/lt (±0,05) 1.420
Solids content (weight) ±2 61%
Viscosity Ford ø 8 at 20°C ±2 26±3
Shelf life +23°C (±2) 24 months in unopened cans
Note Store in a dry and cool place. Do not store at low temperatures.
Application Brush-Roller-Spray
Brush-Roller Max 5% with water
Spray 10-15% with water
Dust dry 30 minutes (20c)
Recoat time 8-12 h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40 microns per coat
Theoret. coverage m2/Lt 8-10

Colors: BIANCO OPACO
Color code: 2CA000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.