Varnishes
Home - Products - Marine Line - Yachting Line - Varnishes - Bekol lucida
Bekol lucida

Bekol lucida

pdf-icon
Code: 6A0000

General purpose yacht varnish based on glycerophtalic resin. Used where a good performance, general purpose varnish economically priced is required. Easy to apply provides a flexible film with good characteristics of brushability and good outdoor resistance. Applied on wooden boats, windows, doors, chairs, etc.

SURFACE PREPARATION AND APPLICATION PROCEDURE 

Bare Wood. The surface should be clean and dry, sandpapered and dusted off. Apply a first coat of LIGNUM IMPREGNANTE onto bare wood in order to allow the varnish to sink into the wood substrate and let dry for 3-4 days. Apply one coat of BEKOL LUCIDA diluted up to 50% and let dry. Apply further 2 coats of BEKOL LUCIDA allowing the required waiting time between coats.

Previously Varnished Wood.
- If the old paint is in poor conditions, loose or powdery, it should be mechanically removed. Clean the surface well and sandpaper with medium grane abrasive paper (230-320); degrease with suitable cleaner and let dry. Touch up bare parts with BEKOL LUCIDA diluted up to 50%. Apply further 2 coats of BEKOL LUCIDA allowing the required waiting time between coats.
- If the old paint is in good condition of adhesion and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), sandpaper and apply 2 coats of BEKOL LUCIDA allowing the required waiting time between coats.

Paint Type One component
Binder type A Alkyd
Specific gravity kg/lt (±0,05) 0.920
Solids content (volume) ±2 55%
Shelf life +23°C (±2) 30 months in unopened cans
Viscosity Ford (Ø4 a 20°C) 120 sec.
Application Brush-Roller-Spray
Brush-Roller 10-15% Thinner 107 or 109
Spray 10-20% Thinner 900
Touch dry 3-4 h (20°c)
Recoat time 24 h (20°c)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40-50 microns per coat
Theoret. coverage m2/Lt 8-10

Colors: TRASPARENTE
Color code: 6A0000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.