Antiskid microspheres floating in the paint film in which they are added to give a hard wearing non-abrasive surface. ANTISKID beads can be added to any type of paint, one or two-component type, clear or coloured. They can be applied also by sieving them over the freshly applied film of varnish.
SURFACE PREPARATION AND APPLICATION
For surface preparation please refer to the product data sheet of the specific product to which antiskid is being added.
The quantity of ANTISKID to be added to the paint is approximately 20-30% by weight, depending however by the specific requirements involved. ANTISKID can be mixed directly in to the paint under stirring or applied by sieving on the surface of the wet paint film.
|Paint Type||white powder|
|Solids content (weight) ±2||100%|
|Shelf life +23°C (±2)||Unlimited|
Color code: 7L0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.