Home - Products - Industry Line - Antirust - Fosfozinc
Fosfozinc
Code: 5Q0000
Anticorrosion primer formulated with phenolic modified glycerophtalic vehicle and zin phosphates. Recommended in all those coating systems requiring fast drying characteristics. Provides good anticorroson properties and outstanding adhesion to the substrate, it is applied on steel structures, sheet iron, aluminium and light alloys, as a basecoat, in synthetic, oil-based and chlorinated based coating systems. Provides good coverage and is recommended for spray application in the building field or in the carpentry industry, as well as on agricultural vehicles, superstructures of ships etc.
SURFACE PREPARATION AND APPLICATION
Bare steel. If sandblasting cannot be carried out use a mechanical wirebrush or abrasive disk to prepare the surface. Remove all sandblasting residuals and dust off the surface. Clean the surface with a cloth soaked with Thinner. Apply immediately a first coat of FOSFOZINC followed by a second one after 4-12hours.
Previously coated steel. Remove with a scraper any loose or powdery paint, remove traces of rust with a wirebrush or with abrasive disk and sandpaper with medium abrasive paper (280-320). Clean the surface with a cloth soaked with Thinner. Apply immediately a first coat of FOSFOZINC on bare parts of steel and if required follow up by a second coat after 4-12 hours.
| Paint Type | One component |
| Code & colour A | Binder type: Linseed oil and phenolic resin |
| Specific gravity kg/lt (±0,05) | 1.320 |
| Solids content (weight) ±2 | 61% |
| Viscosity Ford ø 8 at 20°C ±2 | 18-20 |
| Shelf life +23°C (±2) | 24 months in unopened cans |
| Note | Store in a cool and dry place. Do not store at low temperatures. |
| Application | Brush-Roller-Spray |
| Brush-Roller | 10-15% Nitro Thinner 723 |
| Spray | 15-30% Nitro Thinner 723 |
| Touch dry | 30-60 minutes (20°c) |
| Recoat time | 4-12 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 microns per coat |
| Theoret. coverage m2/Lt | 5-7 |
Colors: GIALLO OX
Color code: 5Q0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
