Sintolin

Sintolin

pdf-icon

Code: 2D & 2E

Synthetic enamel for many years expression of the best Aemme tradition, with a good quality-price ratio. Recommended for coating systems where a long lasting and high gloss finish is desired, providing excellent flexibility and outdoor resistance. It is formulated with alkyd resins and pigments of high quality and light stability. Easy to apply Sintolin has excellent brushability and coverage characteristics. Available in a wide range of colors, It can be applied outside and inside on wood and iron surfaces pre.treated with alkyd or chlorinated rubber basecoat.

SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM

Bare Steel.
The substrate should be clean, dry and well degreased. Remove trace of corrosion and apply 1 coat of primer (e.g. SOTTOFONDO NAUTICA or EVIOX CROMOMINIO) and let dry. Overcoat with 2 coats of SINTOLIN allowing 24 hours between coats.

Bare Wood.
The surface should be clean, dry and well seasoned. If necessary apply one coat of POLIGLASS VARNISH diluted 50-70% or more, or LIGNUM IMPREGNANTE as alternative, without build up a film on the surface. After 24 hours apply 1 coat of SOTTOFONDO NAUTICA. Let dry for 24 hours and overcoat with 2 coats of SINTOLIN allowing 24 hours between coats.

Previously Painted Surfaces.

In poor conditions. Loose or powdery paints should be mechanically removed. Clean the surface well and follow application directions as per bare substrate.

In good conditions. If the old paint is in good condition and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), sandpaper and apply 2 coats of SINTOLIN allowing 24 hours between coats.

Paint Type One component
Binder type A Long oil alkyd
Specific gravity kg/lt (±0,05) (1.200 White - 1.020 Black)
Shelf life +23°C (±2) 30 months in unopened cans
Note Store in a cool and dry place. Do not store at low temperatures.
Viscosity Ford (Ø4 a 20°C) 140-160
Application Brush-Roller-Spray
Brush-Roller 5% Thinner 107
Spray 10% Thinner 900
Dust dry 2 hours
Recoat time 24 h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 30-40 microns per coat
Theoret. coverage m2/Lt 12-14 (9-10 m2/kg)

Colors: BIANCO
Color code: 2D0000

Colors: NERO
Color code: 2DCS99

Colors: PANNA
Color code: 2DCS05

Colors: CIOCCOLATO
Color code: 2DCS11

Colors: ROSSO OX
Color code: 2DCS12

Colors: CANAPA
Color code: 2DCS15

Colors: AVANA
Color code: 2DCS18

Colors: BIANCO GHIACCIO
Color code: 2DCS20

Colors: GRIGIO AUTUNNO
Color code: 2DCS23

Colors: MARRONE
Color code: 2DCS25

Colors: GRIGIO PERLA
Color code: 2DCS26

Colors: GRIGIO PIOMBO
Color code: 2DCS29

Colors: VERDE VITTORIA
Color code: 2DCS38

Colors: VERDE SCURO
Color code: 2DCS39

Colors: VERDE VAGONE
Color code: 2DCS40

Colors: AZZURRO
Color code: 2DCS46

Colors: BLU
Color code: 2DCS48

Colors: GIALLO CROMO
Color code: 2ECS04

Colors: ARAGOSTA
Color code: 2ECS06

Colors: ROSSO AUTO
Color code: 2ECS09

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.