Code: 1H / 1ICL

Water-based wall paint providing good coverage properties and a pleasant satin finish. Suitable as a topcoat for exterior walls; provides good washable properties. Formulated with weather resistant pigments. Easy to apply, this product provides a velvetlike, flexible, odourless film. The application of minimun two coats is recommended (generally slightly more diluted the first coat).


New Plastered Walls.
The substrate should be clean, dry and pre-treated with a water-based sealer (e.g. ISOLFIX) or a solvent based sealer (e.g. FIXACRIL). Allow 4-6 hours to dry and overcoat with two coats of IDROVERNIX allowing the required waiting period between coats.

Previously Coated Walls.
Any loose or powdery old paint should be removed by wirebrushing. If necessary apply on the dry and clean surface a primer coat of water-based selaer (ISOLFIX) or solvent based sealer (FIXACRIL). Overcoat with two coats of IDROVERNIX allowing the required waiting period between coats. If the old paint is in good conditions, apply 2 coats of IDROVERNIX directly allowing the required waiting period between coats.

Paint Type Water-based one-component paint
Binder type A Acrylic
Specific gravity kg/lt (±0,05) 1.525 White
Solids content (weight) ±2 61%
Solids content (volume) ±2 42%
Shelf life +23°C (±2) 30 months in unopened cans
Note Store in a dry and cool place. Do not store at low temperatures.
Viscosity Ford (Ø4 a 20°C) 15.000±2000 cps
Application Brush-Roller-Spray
Brush-Roller 20-40% with water
Spray 20-40% with water
Touch dry 2 hours
Dust dry 15-20 minutes (20c)
Recoat time 4-24 hours
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40-45 microns dry
Theoret. coverage m2/Lt 8-10

Color code: 1H0000

Colors: Colori Pastello
Color code: Colori Pastello


Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.


The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.